Bi-Folding Gate - Commercial - 2 or 4 Panel

The Bi-Folding Gate - Commercial - 2 or 4 Panel is a vehicle access-control solution for secured entrances where space, reliability, and cost effectiveness are important. Its compact folding design requires less space for gate movement compared to swing and sliding gates. It is well suited for parking facilities, storage sites, commercial properties, and industrial entrances. With no overhead track, the entrance remains clear above for trucks and other tall vehicles.

Two-panel configurations fold toward one side of the entrance, while four-panel configurations open from the center to both sides. Both configurations open in only 7 seconds. Programmable controls allow operation to be tailored to the site, and standard battery backup supports continued use during power interruptions. 

Panel Heights and Configurations

• 6 ft high: Passageways up to 15 ft with 2 panels, or 30 ft with 4 panels.
• 8 ft high: Passageways up to 13 ft with 2 panels, or 26 ft with 4 panels.
• 10 ft high: Passageways up to 10 ft with 2 panels, or 20 ft with 4 panels.

Two-panel configurations serve narrower passageways, with maximum dimensions confirmed for the selected height. All dimensions depend on panel weight, infill, wind exposure, and site requirements.

Infill Options

Panel infill can be selected to complement surrounding fencing and the entrance’s appearance. Available materials and patterns should be confirmed for the selected configuration, as infill weight and wind exposure affect allowable gate dimensions. Hot-dip galvanized and optional powder-coated finishes provide flexibility in the finished appearance.

Backup Battery

Standard battery backup supports up to 300 operating cycles during a power interruption, with an extended-capacity option providing up to 1,200 cycles. Actual performance depends on battery condition, temperature, gate resistance, and accessory power use. The system can be configured to remain open or secure when the batteries are depleted.

Installation

Installation requires prepared concrete foundations, accurate column placement, and suitable lifting equipment to position the gate assemblies. Foundation locations, folding clearance, conduit routes, power, and access-control connections should be coordinated before installation. The columns and panels must be leveled and aligned, and safety devices and gate operation tested before the entrance is placed into service.

Installation can be available through Security Entrances Inc. Please inquire.

Specifications

Panel Configuration: 2 or 4 panels
Opening Direction: One side with 2 panels; both sides with 4 panels
Gate Heights: 6, 8, or 10 ft
Two-Panel Passage: Up to 15 ft, subject to height
Four-Panel Passage: Up to 30 ft, subject to height
Opening Time: Standard 8 seconds; adjustable up to 15 seconds
Drive: Electromechanical
Duty Cycle: Continuous
Power Supply: 115 V or 208–230 V AC, 50/60 Hz
Battery Backup: Standard; extended-capacity option available
Hydraulic Operation: Not available
Overhead Track: None
Finish: Hot-dip galvanized steel; optional powder coating
Application: Secured vehicle access and perimeter control