Revolving Turnstile, 2-Way Access – 3 Wing

This motorized three-wing revolving security turnstile provides controlled pedestrian entry and exit for facilities requiring a high level of access security without sacrificing two-way traffic flow. The automated revolving design allows simultaneous bi-directional passage, so an authorized person can enter while another person exits through a separate turnstile sector.

Single-person detection provides security (1-person only) beyond credential verification alone. The system monitors each of the three turnstile sectors for authorized passage and can detect tailgating and piggybacking attempts, preventing an unauthorized person from following or accompanying an authorized user through the entrance. Voice messages from the ceiling speaker will alert.

The round architectural enclosure and transparent security glazing make this revolving entrance suitable for corporate headquarters, data centers, airports, government facilities, museums, meeting centers, secured campuses and other controlled entrances where both security and architectural appearance are important.

Security Entrances Inc. can install and commission this equipment on location. Please inquire.

See Product Video
See Spec Sheet

Anti-Tailgating and Anti-Piggybacking

The system automatically detects users entering or moving through the turnstile and manages the passage sequence. Traffic-light indicators, an intercom and multilingual voice messages can provide instructions and passage-status information to users.

Volumetric sensors detect a person's presence and confirm whether one or two persons are in the sector. The anti-tailgating system detects an unauthorized person attempting to follow an authorized user through the entrance. The anti-piggybacking system is designed to detect two people occupying the same turnstile partition, providing an additional security layer beyond credential-based authorization alone.

Upon an alert, the revolving door stops and all occupants will be informed to back up and re-enter.

Access Control Ready

Access Control Ready: Compatible with access control systems where the appropriate control signal is presented by the control panel to authorize operation of the revolving turnstile.

The motorized entrance can integrate with badge readers, RFID and NFC credentials, fingerprint readers and other access-control equipment. Readers can be mounted externally or incorporated into a column depending on the entrance configuration. The system also provides an RS485 interface for access-control and presence-detection systems.

Security Construction and Glazing

The entrance uses either a removable steel structure designed for assembly directly at the installation location, or for locations with adequate forklift and loading dock areas, we can ship fully assembled. The transparent enclosure maintains visibility through the entrance, and is rated BR2 (bullet resistance).

Security glazing includes:

• Wing glazing: BR1/S ballistic resistance and P4B burglary resistance
• Side glass: BR2/S ballistic resistance and P6B burglary resistance
• Optional glass thickness: BR4/S
• Reinforced configuration: Additional FB4 ballistic-resistant steel panels available

Higher-security configurations are also available with RC4-certified construction, reinforced sides and electrical locks.

Three-Wing Revolving Configuration

The standard 1800 mm diameter configuration provides a clear passage of approximately 29.5" (750 mm) wide × 82.3" (2090 mm) high. Overall dimensions are approximately 70.9" (1800 mm) diameter × 91.5" (2325 mm) high.

Click Here for the 4-Wing Configuration

Click Here for Video – Simultaneous Entry & Exit
See the 3-wing security turnstile in operation with one person entering while another person exits simultaneously through the controlled revolving entrance.
Installation by Security Entrances Inc. in Salt Lake City, Utah

Click Here for Video – Card Reader Access Control
See two users present their credentials at the card reader for individually authorized passage through the access-controlled revolving turnstile.
Installation by Security Entrances Inc. in Salt Lake City, Utah

Click Here for Video – Anti-Piggybacking Demonstration
See an example of the turnstile's anti-piggybacking security function, designed to help prevent more than one person from passing through a controlled section under a single authorization.
Installation by Security Entrances Inc. in Salt Lake City, Utah

Floorless Installation

The floorless design eliminates a raised portal floor or base platform. The structure is assembled and anchored directly to the building's existing finished floor (excluding carpeting).

All electronics and power components are housed in the top canopy, simplifying floor-level requirements. Installation may require drilling and mechanical anchoring into the structural floor, with trenching, core drilling or concealed conduit used where access-control or communication wiring must be routed below the finished floor.

Final anchor locations, conduit routing and any required drilling or trenching should be coordinated with approved project shop drawings before installation.

Indoor / Outdoor Applications

The revolving security entrance can be for indoor installations or protected exterior leading to the interior of a building. A UV-resistant rain cover is available, along with an optional reinforced upper cover for additional protection.

Exterior installations should be coordinated with the architectural opening, drainage, weather exposure, electrical requirements and project-specific environmental conditions.

Emergency and After-Hours Security

An automatic emergency unlocking system is provided for emergency operation. A mechanical lock can provide additional locking during nighttime or other periods when the entrance is not in normal operation.

An optional anti-drilling armored protector is also available for additional protection of the mechanical key cylinder.

Finish and Architectural Options

The revolving entrance can be configured with special colors to coordinate with surrounding architectural finishes. Additional options include reinforced security construction, higher-security glazing, credential readers, fingerprint acquisition and enhanced upper-cover protection.

Technical Specifications