Center Opening Gate - High Security

Crash rated: PU30/P2

• High security gate offering maximum protection against impact loads from vehicles up to the size of a pick-up truck, traveling at speeds of up to 30 mph.
• Being trackless, it offers full height perimeter protection combined with fast operation to allow authorized vehicles quick passage into a secure area.
• Ideal for use at high-traffic critical infrastructure sites, government buildings, and more.
• Crash test certified according to PAS 68:2013 V/2500[N1G]/48/90/1.2/0.0 ASTM equivalent rating is PU30, P2.
• Available Widths: 6.5′, 13.1′
• Available Heights: 6.8′, 8.4′, 10′
• Specifications, drawings, datasheet, and certifications available upon request.

The ASTM F2656 standard was created to replace the old Department of State crash testing standard (K-ratings). It was designed to meet the needs of various organizations responsible for protecting U.S. assets both in the country and abroad. To address this need, ASTM developed the F2656 “Standard Test Method for Crash Testing of Vehicle Security Barriers.” 

The ratings in ASTM F2656 are based on three main factors:

1) type of vehicle used in the test
2) speed of the vehicle during the test
3) how much the vehicle penetrates the barrier during the test.

There are six classes of vehicles used in the testing: Small Car (SC), Full-Size Sedan (FS), Pickup Truck (PU), Medium Duty Truck (M), Class 7 Cabover (C7), and Heavy Goods Vehicle (H). The lighter vehicles (SC, FS, PU) are tested at speeds of 30, 40, 50, and 60 mph, while the heavier vehicles (M, C7, H) are tested at 30, 40, and 50 mph.  

The penetration ratings (P-ratings) define how far the vehicle penetrates the reference point on the barrier. A P1 rating is given for penetration of 3.3 ft (1m) or less, P2 for penetration greater than 3.3 ft (1m) up to 23 ft (7m), P3 for penetration greater than 23 ft (7m) up to 98.4 ft (30m), and a failure for any penetration beyond 98.4 ft (30m).